Place of Origin:
Shandong, China
Brand Name:
sennai
Model Number:
001
Factory Direct Sales Excavator High Hardness Steel Bushing
Excavator bushings are responsible for servicing extremely heavy loads, and as a result very strong materials are necessary to make them. Excavator bushings are usually made of hardened steel alloys. The most popular metals used to make excavator bushings are steel, chromium, titanium, and alloys that contain any of these three. Regardless of which metal is chosen, it goes through a hardening process that includes both chemical and heat treatments to condense the metal molecules. This hardening process makes the excavator bushings more resistant to corrosion and water damage, while also extending their service life.
Excavator bushings come in many sizes, and they all depend on the size, make, and model of excavator that you use. You do not have a choice of excavator bushing size, as you can only purchase the size that works with your excavator. You can choose the materials, though, which contribute greatly to the functionality of your excavator. High-quality excavator bushings require little maintenance, have a long life, and can support extremely heavy loads.
Performance Index
|
|
Data
|
|
Hardness
|
HRC
|
58-62
|
|
Max Load
|
N/mm2
|
250
|
|
Max Linear Velocity
|
m/s
|
0.1
|
|
Max PV Value
|
N/mm2.m/s
|
1.5
|
|
WorkingTemperature Limit
|
℃
|
-100~ +350
|
|
Linear Expension Coefficient
|
10-5/℃
|
1.1
|
Performance Index
|
|
Data
|
|
Hardness
|
HV
|
≥650
|
|
Max Load
|
N/mm2
|
200
|
|
Max Linear Velocity
|
m/s
|
0.1
|
|
Max PV Value
|
N/mm2.m/s
|
1.5
|
|
WorkingTemperature Limit
|
℃
|
-100~ +350
|
|
Linear Expension Coefficient
|
10-5/℃
|
1.1
|
Performance Index
|
|
Data
|
|
Hardness
|
HV
|
≥650
|
|
Max Load
|
N/mm2
|
200
|
|
Max Linear Velocity
|
m/s
|
0.1
|
|
Max PV Value
|
N/mm2.m/s
|
1.5
|
|
WorkingTemperature Limit
|
℃
|
-100~ +350
|
|
Linear Expension Coefficient
|
10-5/℃
|
1.1
|
Material and bushing
characteristics |
|
value
|
Company
|
value
|
|
Maximum load
|
Mpa
|
100
|
psi
|
145,00
|
|
working temperature
|
℃
|
-40 to 300
|
°F
|
-40 to 572
|
|
Max Linear Velocity
|
m/s
|
0.5
|
fpm
|
100
|
|
Maximum PV Value
|
m/sxMPa
|
1.65
|
pis x fpm
|
48,000
|
|
Minimum hardness of sliding layer
|
HB
|
210
|
HB
|
210
|
|
Minimum hardness of dual parts
|
HRC
|
40
|
HRC
|
40
|
Send your inquiry directly to us